Metrohm tiamo 1.0 Manual - Manual (Page 653)

Subwindow Titrants/Solutions 629
6.6 Subwindow Titrants/Solutions
6.6.1 General
Subwindow Titrants/Solutions
The subwindow Titrants/Solutions contains the solution table with all automatically
recognized and manually added titrants and auxiliary solutions. It can be shown in
a separate window in the program part Configuration as a part of the Configura-
tion view or (if not present on the desktop) with
View, Quick access . The subwindow
can be enlarged and diminished as required; it can also be maximized.
Titrants
Titrants are used as solutions for the titration commands DET , MET , SET and KFT .
They can be used in exchange units or dosing units.
Auxiliary solutions
Auxiliary solutions are used as solutions for the dosing commands ADD and LQH .
They can be used in exchange units or dosing units.
Intelligent exchange units (IEU) and dosing units (IDU)
Intelligent exchange and dosing units have a datachip with stored solution data.
When placed on intelligent devices (e.g. Titrando) they are recognized automati-
cally and stored in the solution table.
Non-intelligent exchange units (EU) and dosing units (DU)
Non-intelligent exchange and dosing units must be added manually to the solu-
tion table.
6.6.2 Solution table
Contents
In the solution table the following information about automatically recognized or
manually added solutions is shown as standard:
Solution name
Name of the solution.
Concentration
Concentration (value and unit) of the solution.
Cylinder volume
Cylinder volume of the exchange or dosing unit in mL.
Type
Type of Exchange unit or Dosing unit.
Dosing device
Device name and dosing connection of the device to which the exchange
or dosing unit is attached (only for intelligent exchange/dosing units).