Metrohm tiamo 1.0 Manual - Manual (Page 335)

Commands 311
Acoustic signal
on, [ off ]
If this option is enabled, an acoustic signal will be emitted additionally to
the message defined above in case the limits are exceeded.
Action
on, [ off ]
Selecting the action to be taken when the limits are exceeded.
Stop determination
[ on ], off
The current determination (or the conditioning) is terminated and the next
determination of the series is started.
Stop determination and series
on, [ off ]
The current determination (or the conditioning) and the series are termi-
nated.
TRACK
Start command for Normal track.
Appearance
The command has the following appearance:
Parameter
Command name
25 characters, [ Track # ]
Name of the command.
Return immediately
on, [ off ]
If this option is disabled, the track containing a Call for this track will wait
until this track has been finished.
If this option is enabled, this track sends an acknowledgement immedi-
ately to the track containing a Call for this track. From now on, both tracks
are running simultaneously.
Delete all data
on, [ off ]
All data created by this track will be deleted at each new start of the track if
this option is activated.