Canon FAX-L1000 - Manual (Page 108)

2-52
FAX-L1000 Chapter 2: Operating Instructions
#1 SSSW
SW06 (service soft switch 06: scan condition settings)
Bit Function 1 0
0 Document feed after DES on No feed Feed
1 Prescan for document scanning No prescan Prescan
2 Document length restriction Not restricted 39.37" (1 m) max.
3 (New) Stamp option Yes No
4 Document scan width LETTER A4
5 Recording paper output for long First page Divided onto
image copy only multiple pages
6 Copy function resolution Variable Always fine mode
7 Superfine mode setting when Set Not set
AUTO key selected
[Bit 3]
If a stamp unit option is installed, set this switch to 1. If it is set to 1, the Stamp Option
button on the operational panel becomes effective and the “ TX STAMP ” setting menu
appears as user’s data.