Canon FAX-L1000 - Manual (Page 97)

2-41
FAX-L1000 Chapter 2: Operating Instructions
3.3.2 Service data setting
Service data can be checked and changed with items on display menus. The effective SSSWs/
parameters and their default values in this fax machine are shown in
3.3.4 Service data
flowchart in this chapter. Detailed description of each SSSW/parameter is not given in this
manual except the new SSSWs/parameters added to this model. See G3 Facsimile SERVICE
DATA HANDBOOK (Rev. 0) (supplied separately) for details of them. The new switches
for this model are described in 3.3.6 New SSSWs/parameters added to this model.
#1 SSSW (Service Soft Switch Settings)
These setting items are for basic fax service functions such as error management, echo
countermeasures, and communication trouble countermeasures.
#2 MENU (MENU switch settings)
These setting items are for functions required during installation, such as NL equalizer and
transmission levels.
#3 NUMERIC Param. (NUMERIC parameter settings)
These setting items are for inputting numeric parameters such as the various conditions for
the RTN signal transmission.
#4A SPECIAL
These setting items are for telephone network control functions.
#4B NCU (NCU settings)
These setting items are for telephone network control functions such as the selection signal
transmission conditions and the detection conditions, for the control signals sent from the
exchange.
#4C ISDN (ISDN settings)
These settings items are for the purpose of contlloing the D-channel protocol and the B-
channel protocol.
#5 TYPE (TYPE setting)
The type setting makes the service data conform to a specific country communications
standards.
#6 GENESIS (UHQ function setting)
These setting items are for scanned image processing such as edge enhancement and error
diffusion processing.
#7 PRINTER (PRINTER function settings)
These setting items are for basic printer service functions such as the reception picture
reduction conditions. Also there is an item for resetting the printer section without
switching the power off-on.