Canon FAX-L1000 - Manual (Page 446)

5-88
FAX-L1000 Chapter 5: Appendix
3.4.5 Installation Position Adjustment of Separation Guide of
Envelope Feeder (adjustment of gap between separation guide
and lower separation roller)
a) When
Normally, the separation guide and the top cover of the envelope feeder must be removed
as one. However, if only the separation guide has been removed for unavoidable reason, or
it needs to be replaced due to deformation, make the adjustment as shown below.
b) Tools
Tool Use
1.6mm thickness gauge (RY9-0123) Measuring gap between the separation guide
and the lower separation roller
c) Adjustment
(1) Install the separation guide.
(2) Insert the 1.6mm thickness gauge (RY9-0123) between the separation guide and the
lower separation roller.
(3) Fix the separation guide with 1.6mm gap between the separation guide and the lower
separation roller.
Figure 5-35 Adjustment of Separation Guide
RY9-0123
1.6mm
Thickness gauge
Separation guide
1.6mm
Separation guide
Lower separation roller Thickness gauge
(1.6mm, RY9-0123)