Canon FAX-L1000 - Manual (Page 294)

4-42
FAX-L1000 Chapter 4: Maintenance and Service
"NO RX PAPER" (#0012)
Cause: Declares that the other fax has no recording paper for DIS.
Solution: Contact the other party and have them load paper into their fax.
"NO TEL#" (#0022)
Cause: No one-touch speed dialing, coded speed dialing, or group dialing
telephone number is registered.
Solution: Register the one-touch speed dialing, coded speed dialing, or group dialing
telephone number.
"NOT AVAILABLE NOW"
Cause: You pressed an one-touch speed dialing, coded speed dialing, or group
dialing, that is not registered for the feature you are trying to use.
Solution: Check the contents of the one-touch speed dialing, coded speed dialing, or
group dialing registration, then try again.
"NOT FOUND, TRY AGAIN"
Cause: The box number you specified does not exist.
Solution: Try again with a different number.
"OUTPUT TRAY FULL"
Cause: The output tray is full of paper.
Solution: Pick up the printed pages on the tray.
"PASSWORD POLL REJECT"
Cause: You set up a polling box for polling sending with an ITU-T password, but
the other party’s fax unit does not support use of an ITU-T password for
polling receiving.
Solution: Transmit without an ITU-T password.
"PASSWORD TX REJECT"
Cause: You attempted to send a document with an ITU-T password, but the other
party’s fax unit does not support use of an ITU-T password for receiving.
Solution: Transmit without an ITU-T password.
"PRT ALT. PAPER SIZE? YES=( ✽ ) NO=(#)"
Cause: The size of the available recording paper does not match the size of the
document waiting to be printed.
Solution: If you do not mind printing on a different paper size, press ✽ button. If
you want to print the correct paper size, press
Stop button and install the
correct size paper. Then press Start/Scan button.