Canon FAX-L1000 User Manual

Page 535

Advertising
background image

5-177

FAX-L1000 Chapter 5: Appendix

##1030 [TX/RX] Response to status enquiry.

Cause:

Indicated above

Solutions:

(1) Re-establish communication.
(2) Output a communications analysis list, and analyze it.
(3) Make sure the 4 digits of the applicable error code are registered in

#4C ISDN BASIC, [G4/G3 Fallback]

and

[Speech Fallback]

.

(4) Take countermeasures as outlined in

D-channel connection

error

in

this Chapter, 3.6.6 Maintenance and service, c)

Communication problems.

(5) Make an inquiry to the maker of the Switching equipment.

##1031 [TX/RX] Normal, unspecified.

Cause:

Indicated above

Solutions:

(1) Re-establish communication.
(2) Output a communications analysis list, and analyze it.
(3) Make sure the 4 digits of the applicable error code are registered in

#4C ISDN BASIC, [G4/G3 Fallback]

and

[Speech Fallback]

.

(4) Take countermeasures as outlined in

D-channel connection

error

in

this Chapter, 3.6.6 Maintenance and service, c)

Communication problems.

(5) Make an inquiry to the maker of the Switching equipment.

##1032 [TX/RX] Look of outgoing connection

Cause:

Indicated above

Solutions:

(1) Re-establish communication.
(2) Output a communications analysis list, and analyze it.
(3) Make sure the 4 digits of the applicable error code are registered in

#4C ISDN BASIC, [G4/G3 Fallback]

and

[Speech Fallback]

.

(4) Take countermeasures as outlined in

D-channel connection

error

in

this Chapter, 3.6.6 Maintenance and service, c)

Communication problems.

(5) Make an inquiry to the maker of the Switching equipment.

##1033 [TX/RX] Other party is busy

Cause:

Indicated above

Solutions:

(1) Re-transmit.
(2) Output a communications analysis list, and analyze it.
(3) Make sure the 4 digits of the applicable error code are registered in

#4C ISDN BASIC, [G4/G3 Fallback]

and

[Speech Fallback]

.

(4) Take countermeasures as outlined in

D-channel connection

error

in

this Chapter, 3.6.6 Maintenance and service, c)

Communication problems.

(5) Make an inquiry to the maker of the Switching equipment.

Advertising