Canon FAX-L1000 - Manual (Page 570)

5-212
FAX-L1000 Chapter 5: Appendix
b-9) Remove the ROM DIMM from its packaging and insert it into the
socket by pushing it into the middle of the three slots at the top
right of the motherboard until it snaps into place.
b-10) Place the memory slot cover back on the printer and close it.
NOTE
• Be sure to open the entrance to the second socket by pushing back on the
left tab for that slot.
• Make sure the indent on the module is on the right side of the module as
you press it into the board.
• If the module is inserted into a different slot, it will not operate correctly.
Therefore, be sure to insert the module into the correct (middle) slot.