6 what to do when a problem occurs (all clear), Figure 1-14 all clear – Canon FAX-L1000 User Manual
Page 50
1-30
FAX-L1000 Chapter 1: Safety and Precautions
3.6 What to do when a Problem Occurs (All clear)
Very rarely, during use, the display may go out, all the buttons may stop working, or some other
trouble may occur because of strong electrical noise or strong shock. If such trouble occurs,
perform All clear operation.
During installation, we recommend that you perform All clear operation. Below is the
procedure for performing All clear.
Figure 1-14 All Clear
While waiting to return to the ready state after executing “
All clear
”, please do not
press the Stop button. Doing so may cause a malfunction afterwards.
Data Registration
Standby
Set
SERVICE MODE
#8 CLEAR
Set
#8
CLEAR
#8 CLEAR
(CLEAR
PLEASE WAIT
Display #8 CLEAR by
pressing or button
Display ALL by
pressing or button