Canon FAX-L1000 - Manual (Page 66)

2-10
FAX-L1000 Chapter 2: Operating Instructions
2.4 Reception
There are 3 reception methods: auto reception, manual reception, and auto reception switching.
a) Auto reception
This is set when the machine is used exclusively for facsimile. The initial condition of the
machine is set to “Auto reception”.
Setting method
(1) Select “ MAN/AUTO SWITCH ” with the user data registration RX setting, display
“ OFF ” with the ▼ ▲ buttons, and confirm with the SET button.
(2) Press the Manual RX button to turn off the Manual RX LED.
b) Manual reception
This fax will produce a calling tone no matter if the other machine is a facsimile or
telephone.
When the other party is sending by facsimile, receive by pressing the
Start/Scan button.
Remote reception is also possible from a connected optional handset or telephone.
Setting method
(1) Select “ MAN/AUTO SWITCH ” with the user data registration RX setting , display
“ OFF ” with the ▼ ▲ buttons, and confirm with the SET button.
(2) Press the Manual RX button to turn on the Manual RX LED.
NOTE
When receiving manually, communication with the other party is not possible
unless the telephone is connected.
c) Manual/Auto switching
When receiving manually, when the receiver is not taken off the hook within the number
of seconds (
F/T RING TIME ) set in the user data registration settings, the machine will
automatically enter FAX mode and automatic reception will begin.
Setting method
(1) Select “ MAN/AUTO SWITCH ” with the user data registration RX setting , display
“ ON ” with the ▼ ▲ buttons, and confirm with the SET button.
(2) Press the Manual RX button to turn on the Manual RX LED.
REFERENCE
Refer to the USER’S GUIDE for details regarding the various reception methods.