Canon FAX-L1000 - Manual (Page 462)

5-104
FAX-L1000 Chapter 5: Appendix
b) Installation
b-1) Unpacking
Check that the box contains the FAX-L1000 ISDN Kit, cables, ROM, modular spacers and
four screws.
b-2) Preparation
Perform the operations below before attaching the kit.
(1) Disconnect the modular jack cord (telephone line) from the fax.
(2) Disconnect the power cord of the fax unit at the power source. Wait at least 10
minutes for the power supply unit to cool before continuing to work.
(3) If a FAX-L1000 Printer kit (Option) or an FAX-L1000 Network Printer Upgrade Kit
(Option) is installed, disconnect the IEEE 1284 compliant parallel interface cable or
the network cable from the options.
(4) Remove the one screw.
(5) Slide the right cover to the right, open the top side, and pull up to remove.
Figure 5-44 Preparations for Installation 1
Right cover