Canon FAX-L1000 - Manual (Page 109)

2-53
FAX-L1000 Chapter 2: Operating Instructions
#1 SSSW
SW26 (service soft switch 26: transmission function settings)
Bit Function 1 0
0 Compulsory direct transmission Set Not set
function
1 Not used
2 Not used
3 Not used
4 Not used
5 (New) Transmission error redial function Yes No
6 When STOP key is pressed Only cancel Cancel all
during a sequential boradcastiong communication communication
in progress
7 Error transmission report when Not output output
transmission is stopped
[Bit 5]
It can select whether transmission error redial function is effective.
When "Yes" is selected, transmission error redial setting function is displayed in
transmission setting item in user menu settings and it is possible to set and activate this
function. However, quick memory transmission function and memory overflow
transmission function are invalid. The quick memory transmission function itself is not
displayed as setting item.
When "No" is selected, transmission error redial setting function is not displayed in the
transmission setting item in user menu settings and it is impossible to set and activate this
function. Though, quick memory transmission function and memory overflow
transmission function are valid.
Bit5 1 0
Function
Transmission error
redial
Quick memory
transmission
Memory overflow
transmission
Setting: possible
Operation: possible
Setting: possible
Operation: possible Setting: impossible
Operation: impossible
Operation: impossible Operation: possible
Setting: impossible
Operation: impossible