Canon FAX-L1000 - Manual (Page 427)

5-69
FAX-L1000 Chapter 5: Appendix
b-3) Cassette installation
(1) When you plug the power cord into a socket, “ SUPPLY REC. PAPER ” is displayed
and the Alarm lamp blinks. Check that the cassette pickup roller is at its initial
position.
NOTE
After connecting the paper feed unit PF-52 and install the toner
cartridge, when you plug the power cord, the main unit automatically
detects that the feed unit is connected and the cassette pickup roller is
set to its initial position. This initial position is as shown in below.
After connecting the feed unit, if you load the cassette when the
cassette pickup roller is not in its initial position, then the cassette will
strike the roller and may break it. Always check that the roller is in its
initial position before loading the cassette.
Figure 5-23 Pickup Roller Initial Position
b-4) Operation Check
Empty all the recording paper other than that in the cassette 2, make a copy, and check
that the recording paper is picked up correctly.
Cassette pickup roller
Cassette pickup roller