Canon FAX-L1000 - Manual (Page 404)

5-46
FAX-L1000 Chapter 5: Appendix
b) Setting the printer operations
Table 5-1 shows printer operations that can be set by combinations of switches on the
printer driver tester.
Set the operation mode with SW1 and SW2 and various data with SW3 to SW9 according
to the table 5-1. Contents set by SW3 to SW9 are sent to the printer by turning ON SW11,
and the printer executes the set operations. Once SW11 has been turned ON, the set
contents remain until canceled. If multiple settings are to be made, set them one by one
turning ON SW11 each time.
To cancel the setting, set the corresponding switch back to “0” and then turn ON SW11 or
disconnect the power cord.
For instance, a test print is executed when turning ON SW11 with SW1 and SW2 set to “0”
and SW4 to “1”. The test print is continued until the setting is canceled by turning ON
SW11 with SW4 set to “0”.