Figure 3-26 transfer, Figure 3-27 separation – Canon FAX-L1000 User Manual
Page 200
3-56
FAX-L1000 Chapter 3: Technical Reference
2.5.4 Transfer/Separation section
In this block, the toner image is transferred from the drum surface to the paper.
a) Transfer
Figure 3-26 Transfer
Positive charges are applied to the back of the paper to attract the negatively charged toner
particles to the paper.
Roller transfer method is applied to stabilize the paper feed and to reduce ozone generation.
b) Separation
Figure 3-27 Separation
The elasticity of the paper causes it to separate from the drum.
To stabilize the paper feed system and to prevent droplets on the printed image at low
temperature and low humidity, the charge on the back of the paper is reduced by the static
charge eliminator.
Paper
Transfer charging roller
Photo-
sensitive
drum
Paper
Transfer charging roller
Static charge eliminator
Photo-
sensitive
drum