Canon FAX-L1000 User Manual
Page 126
2-70
FAX-L1000 Chapter 2: Operating Instructions
3.4.4 Print test
a) Test mode print test
The Print Test menu is selected by pressing the numeric key
3
from the test mode menu. In
this test, various print patterns are output from the printer. As service print patterns, press
the numeric key
2
from the Print Test menu to select “
3-2: BLACK
” or press the numeric
key
6
to select “
3-6: ENDURANCE
”. Do not use the other patterns. They are for
development and factory use.
Check the following for the print pattern.
Figure 2-47 Print Pattern Check
NOTE
After completion of the print test, if the printing was normal, copy a
document. If there is any defect in the copied image, there is a defect in the
scan section.
Check for image shrinking, stretching,
soiling, and black stripes.
“
3-6: ENDURANCE
”
Check for white stripes and
unevenness.
“
3-2: BLACK
”