Canon FAX-L1000 - Manual (Page 69)

2-13
FAX-L1000 Chapter 2: Operating Instructions
3.1.2 Service report output functions
This fax outputs the service data setting status, past communications history reports, detailed
error information reports, etc. in service mode.
a) List of service reports
This fax outputs the service reports shown below.
Report type Operations
Service data list
System dump list
Dch log report
Bch log report
Transmission report
(with service error code
and dump list)
Reception report
(with service error code
and dump list)
In the service mode, press the Report button, select
the report type, and press the Set button.
(When the optional FAX-L1000 ISDN Kit is
installed, the Bch log report can be output if the
service data #4C ISDN Bitswitch SW01 bit 7 is
set to “0.”)
If you set bits 0 and 1 of #1 SSSW SW01 in the service
mode, the service error code and dump list are indicated
on the activity report.
If you set bits 0 and 1 of #1 SSSW SW01 in the service
mode, the service error code and dump list are
indicated on the activity report.