Hardy HI 3010 Filler/Dispenser Controller - Manual (Page 35)

HI 3010 Filler/Dispenser/IBC 22
User Guide
FIG. 3-47 RESUME FILLING SLOW
No Fast Feed Alarm
- - - - - ALARM CONDITION - - - - -
• If the Fast Fill Gate valve or feeder is not
open or on at the time you want to fill, the
NO FAST FEED alarm appears on the dis-
play. (See Fig. 3-48)
FIG. 3-48 NO FAST FEED ALARM
1. Determine why you do not have fast
feed and correct the problem.
2. Press the Clear button to clear the
alarm. The RESUME FILLING FAST
display appears for single speed/
sequential filling. (See Fig. 3-49)
FIG. 3-49 RESUME FILLING FAST DISPLAY
3. Press the Start button to resume fast
fill.
4. In dual speed simultaneous operation
press the Clear key to clear the alarm.
The RESUME FILLING SLOW dis-
play appears.
NOTE: This gives you the option to do the fill at the slow
speed only, which takes much longer.
Feed On Alarm
- - - - - ALARM CONDITION - - - - -
• If the Fast Fill Gate valve or feeder does
not close or stop at the end of a fill, the
FEED ON alarm appears on the display.
(See Fig. 3-50)
FIG. 3-50 FAST FEED ON ALARM
1. Determine why the Fast Feed is on
and correct the problem.
2. Press the Clear button to clear the
alarm.
3. If the target weight is NOT within the
target window and you do not have
the JOG function turned ON, the fill is
not accepted and an UNDER FILL! or
OVER FILL alarm appears depending
on the weight filled.
No Slow Feed Alarm
- - - - - ALARM CONDITION - - - - -
• If the Slow Fill Gate valve or feeder is not
on or open at the time you want to slow
fill, the NO SLOW FEED alarm appears
on the display. (See Fig. 3-51)
FIG. 3-51 NO SLOW FEED ALARM
1. Determine why there is No Slow Feed
and correct the problem.
2. Press the Clear button to clear the
alarm. The “RESUME FILLING
SLOW” display appears for dual
speed sequential filling application
(See Fig. 3-52)