Hardy HI 3010 Filler/Dispenser Controller - Manual (Page 84)

71 CHAPTER 5
Operating Procedures/IBC Dispenser
FIG. 5-81 OPERATION - TOTALIZERS PAGE
Step 2. Click on the Clear Totalizer Pull Down menu to
select an ingredient whose totalized weight you
want to clear. (See Fig. 5-106)
FIG. 5-82 CLEAR TOTALIZER LIST/SELECTING
INGREDIENT TO CLEAR
Step 3. Click on the Ingredient # you want to clear.
Step 4. Click on the Clear Totalizer button to clear the
totalized weight for the selected ingredient.
CAUTION: P RESSING THE C LEAR T OTALIZER BUTTON
WILL SET THE SELECTED T OTALIZER TO ZERO .
Step 5. Click on “Home” to return to the Filler/Dispenser
Home Page.
NOTE: The ability to operate the instrument from a Web
Page will be available in future iterations of the
Web Site.
Operating in Manual Mode from the Front
Panel
The HI 3010 allows the user to perform some of the opera-
tions in manual mode. The following Dispensing Functions
can operate Manually:
• Tare Scale
• Discharge
• Refill
• Auxiliary Device (Output Relay)
• Fast Dispense
• Slow Dispense
Step 1. Press the Manual button. The Manual Mode dis-
play appears with the cursor in front of Tare
Scale. (See Fig. 5-107)
FIG. 5-83 MANUAL MODE DISPLAY/SELECTING
TARE SCALE
Step 2. Press the Enter button. The Tare Mode display
appears. (See Fig. 3-108)
FIG. 5-84 TARE MODE DISPLAY
Step 3. Follow the instruction on the screen. To Tare the
scale press the Clr. (Clear) button. A display
appears momentarily that says Tare Complete.
Step 4. Press the Exit button to return to the Manual
Mode Display.
NOTE: Each one of the displays will have different
instructions.
Step 5. Press the down arrow until the cursor is in front
of Discharge