Hardy HI 3010 Filler/Dispenser Controller - Manual (Page 71)

HI 3010 Filler/Dispenser/IBC 58
User Guide
• Press the Enter button. The Standby Menu
appears with the new Amount Required. In
our example we used 1000.00 lbs. (See
Fig. 5-18)
FIG. 5-18 STANDBY MENU/NEW AMOUNT
REQUIRED
Step 5. If the number of dispenses is the number you
want, go to Step 7.
Step 6. If you want to change the number of dispenses,
do the following:
NOTE: 1Dispense = 1 Cycle. Dispenses and Cycles are
used interchangeably.
• Press the Cycle/7 button. The Choose Dis-
pense Menu appears. (See Fig. 5-19)
FIG. 5-19 CHOOSE DISPENSE MENU
• Press the Clear button to erase the existing
values. (See fig. 5-20)
FIG. 5-20 DISPENSE MENU/ERASED VALUES
• Use the alphanumeric keypad and enter
the new number of dispenses. For our
example we used 11. (See Fig. 5-21)
NOTE: You can enter values from 1 - 9999.
FIG. 5-21 IBC DISPENSE MENU/NEW DISPENSES
NUMBER
• Press the Enter button. The Standby Menu
appears with the new cycles value. (See
Fig. 5-22)
FIG. 5-22 STANDBY DISPLAY/NEW IBC DISPENSES
NUMBER
Step 7. Press the Start button.
• When you Press the Start button to begin
the IBC dispensing process, the Standby
Display changes and shows that the instru-
ment is on and waiting to dispense. (See
Fig. 5-23)
FIG. 5-23 WAITING TO DISPENSE ON
Step 8. If the motion is within set motion tolerance, the
scale autotares and if The OK to Dispense Fea-
ture is not on, dispensing begins. The IBC Dis-
pense Display appears. (See Fig. 5-24)