Hardy HI 2151/30WC Single-Scale Controller - Manual (Page 120)

HI 2151/30WC MANUAL
7-22
To clear the Total: With the Total displayed, press the TEST/CLR button. The Total Regis-
ter will now be reset to zero.
To exit the Total
Mode: Press the MODE button until the desired mode is indicated.
NOTE: The Peak Hold and Totalizer modes do not support the LB/KG button or LB/KG
remote input. They will display and transmit only the mode the instrument was cali-
brated in.
Allen-Bradley Remote I/O
Option -B8 See the Allen-Bradley Remote I/O Installation and Operation Manual
(P/N 0596-0173) for complete Operating Instructions.
Profibus Interface Option
-B12 See the Profibus Installation and Operation Manual (Prt. # 0596-0211)
for complete Operating Instructions.