Mechanical installation -2 – Hardy HI 2151/30WC Single-Scale Controller User Manual
Page 32
HI 2151/30WC MANUAL
3-2
5. Dynamic Data Exchange (DDE) I/O Server - B14
1
DDE Server Software Diskette
1
6 foot test cable
1
9 pin to 25 pin adapter
1
Installation and Operation Manual
6. HI 215IT-SS1/-PS1/-FG1 Integrated Technician Junction Box
1
Enclosure and circuit card with nine mating connectors
installed.
2
1" diameter push in plugs
5
1.12" diameter rubber gaskets
5
0.5" diameter steel locknut fastener
5
½ " NPT nylon cord grip strain relief (.375" - .500")
7. HI 215IT-SS2/-PS2/-FG2 Integrated Technician Junction Box No
C2
1
Enclosure and circuit card with nine mating connectors
installed.
2
1" diameter push in plugs
5
1.12" diameter rubber gaskets
5
0.5" diameter steel locknut fasteners
1
½ NPT nylon cord grip strain relief (.375" - .500" Blue Grip)
4
½ NPT nylon cord grip strain relief (.375" - .500" White Grip)
Step 4.
If any items are missing, damaged, or there are any questions,
please contact Customer Support at:
Hardy Instruments
9440 Carroll Park Drive, Suite 150
San Diego, CA
92121
Phone: (858) 278-4900
FAX: (858) 278-6700
Web Site: http//www.hardyinst.com
E-Mail: [email protected]
Step 5.
Record the model number and serial number of the Weight
Controller. Store in a convenient, secure location for reference
when contacting Hardy Instruments Customer Service
Department or to buy parts or firmware upgrades.
Mechanical Installation