Hardy HI 2151/30WC Single-Scale Controller - Manual (Page 31)

Chapter 3 - Installation
3-1
CHAPTER 3 - INSTALLATION
Chapter 3 covers unpacking, cabling, interconnecting and installing the
HI 2151/30WC weight controller. Users and service personnel should
be familiar with the procedures in this chapter before installing or oper-
ating the HI 2151/30WC weight controller.
Unpacking Step 1. Before signing the packing slip, inspect the packing for dam-
age of any kind.
Step 2. Report any damage to the carrier company immediately.
Step 3. Check to see that everything in the package matches the bill
of lading. You should normally have:
1. HI 2151/30WC Panel Mount
1 HI 2151/30WC instrument with mating connectors and ordered
options installed.
1 Mounting Rail Kit (Prt. # 0551-0287-01)
• (4) mounting Rails
• (4) 6-32 UNC phillips pan head machine screws
1 Installation and Operation Manual
2. HI 2151/30WC-RM Remote Mount
1 Instrument with mating connectors and ordered options
installed.
1 Remote display/keypad with gasket and mounting hardware
attached.
1 60 inch display to instrument interconnect ribbon cable.
1 Installation and Operation Manual
3. HI 2151/30WC-WS Wall Mount
1 Instrument with mating connectors and ordered options
installed.
1 Installation and Operation Manual
4. HI 2151/30WC-BR Blind Remote
1 Instrument with mating connectors and ordered options
installed.
1 Installation and Operation Manual