Storing, modifying, and recalling presets, From palettes – PRG Vx76 User Manual 3.6 User Manual
Page 133
VX76 SOFTWARE USER MANUAL
117
Storing, Modifying, and Recalling Presets
From Palettes
Store a new preset using Presets palette:
Step
1. Select required channels.
Step
2. Ensure Presets are selected on at least one palette. (Refer to
Step
3. Using manual controls, set all required parameters.
Step
4. Filter attributes as required using touchscreen display.
Step
5. Press and hold [Store] while pressing
Preset Palette Button
or
[Store] / [Label] /
Preset Palette Button
xxxxxx
Enter/Accept
.
Store a new preset using command-line keypad:
Step
1. Select required channels.
Step
2. Using manual controls, set all required parameters.
Step
3. Filter attributes as required using touchscreen display.
Step
4. Press [Store] [Preset] [n] [Enter]
or
[Store] [Preset] [n] [Label]
xxxxxx
Enter/Accept
(where n is the discrete
Preset number).
Label an existing Preset palette:
When labeling, the name can be entered on the console touchscreen keyboard
or
computer keyboard.
Step
1. Ensure Presets are selected on at least one palette. (Refer to
Step
2. Press and hold [Label] while pressing any Preset bank, page, or palette button.
Step
3. Enter alpha/numeric label.
Add new channels to a Preset:
If a Preset is already stored, the [Store] command can add new channels to that Preset, provided those channels are
selected. If the channel already has data for the Preset, that data will be overwritten with current data.
Step
1. Select required channels.
Step
2. Ensure Presets are selected on at least one palette. (Refer to
Step
3. Press and hold [Store] while pressing
Preset Palette Button
or
[Store] [Label] /
Preset Palette Button
xxxxxx
Enter/Accept
.
Modify parameters using Selective Store:
The Selective Store command modifies parameter data for selected channels as determined by any filter settings. For
more information, refer to
Step
1. At touchscreen display, modify filter settings as required.
Step
2. Select required channels.
Step
3. Press and hold [Sel Store] while pressing
Preset Palette Button
or
[Sel Store] [Preset] [n] [Enter] (where n is
the discrete Preset number).
Update a preset:
The [Update] command does not add channels, but modifies any stored data that has been changed by manual
control for channels and parameters associated with that Preset. It does not route through the filter settings. For more
information, refer to
Step
1. Make changes by manual control.
Step
2. Press and hold [Update] while pressing
Preset Palette Button
or
[Update] [Preset] [n] [Enter] (where n is
the discrete Preset number).