Quickfocus – PRG Vx76 User Manual 3.6 User Manual
Page 215
VX76 SOFTWARE USER MANUAL
199
QuickFocus
The QuickFocus feature allows you to step sequentially through each stored channel in a selected preset to adjust its
parameters. The new parameter data can then be stored into the preset. This allows you to easily isolate data so that
it can be updated without affecting the remaining data in your preset.
QuickFocus is an alternate control state. It will be active until de-selected.
Guidelines:
+
During QuickFocus, the entire preset is brought up live and all other outputs are disabled (as long as the console
is still in QuickFocus mode).
+
QuickFocus is affected by its configuration in the System Settings window. When the "Select Only Referenced
Channels" option is checked, only channels that are referenced in cues or effects will be selected while using
QuickFocus. (For more information about the Setting window, refer to
QuickFocus
Setting