PRG Vx76 User Manual 3.6 - Manual (Page 268)

252 VX76 SOFTWARE USER MANUAL
Store a cue with a wait/trail time:
+ [Store] <Cue> [n] [Wait/Trail] [m] [Enter] - stores Cue n with a wait time of m.
Store a cue with a link and a wait/trail time:
+ [Store] <Cue> [n] [Link] [x] [Wait/Trail] [m] [Enter] - stores Cue n and provides an out of sequence link to Cue x with
a wait time of m.
Add a wait/trail time to an existing cue:
+ [Cue] [n] [Wait/Trail] [x] [Enter] - adds a wait time of x for Cue n.
Add a wait/trail time to a range of cues:
+ [Cue] [m] [Thru] [t] [Wait/Trail] [x] [Enter] - adds the specified wait time (x) to all of the cues in the specified cue
range (m thru t).
Remove a wait/trail time from a cue:
+ [Cue] [n] [Wait/Trail] [Enter] - removes the wait time from the specified Cue n.
Remove a wait/trail time and link from a cue:
+ [Cue] [n] [Link] [Wait/Trail] [Enter] - removes both the wait and link instruction for the specified Cue n.
Remove a wait/trail time from a range of cues:
+ [Cue] [n] [thru] [t] [Wait/Trail] [Enter] - removes the wait or trail time from the specified cue range (n thru t).
To add a wait/trail time to the currently selected cue, press [Wait] [n] [Enter] - where n is the desired time.
* Click [Wait/Trail] once for Wait and twice for Trail.
Global Cue Time
Cue Time provides a simplified option for parameter timing. If there is a Cue Time associated with a cue, any fixture
parameter that has a zero (default) time value will use the cue time instead when the cue is recalled. If the parameter
has a non-zero time, it will override the global cue time.
The [Cue/Out Time] key in the upper right of the command keypad is used to enter a Cue Time:
+ The first click on the button will be Cue Time, a double-click will be Out Time. (See Out Time on next page.)
+ If Cue Time is already entered on a command, the second press of the button will automatically show as Out
Time.
Store a cue with a cue time:
[Store] <Cue> [n] [Cue/Out Time] [x] [Enter] - stores Cue n with a global cue time of x.
Tip