PRG Vx76 User Manual 3.6 - Manual (Page 86)

70 VX76 SOFTWARE USER MANUAL
Encoders HUD Window
The Encoders software window functions just as the front panel encoders to provide incremental control of luminaire
parameters. Refer to the function explanations in the section
"Front Panel Encoders" on page 61 for more in-depth
information on each encoder function and the associated min/max settings.
To operate the window controls:
+ At Operation menu, select Encoder HUD to open Encoders window.
+ To use a virtual encoder, press and hold the mouse down on a knob, then drag the mouse up or down to increase
or decrease the parameter value.
+ Apply Shift, Control, Fan, and Slow features by clicking the buttons at the top of the window.
+ Switch between encoder types using the drop-down menu at the top of the window.
+ Click the pin icon at the top-right corner to keep the HUD on top of other windows. (When pinning is active, the
pin icon will turn from gray to white.)
Store new min/max settings:
Step 1. Select luminaires to be included in min/max settings.
Step 2. At Encoder window, select parameter group from drop-down menu.
Step 3. Using encoders in window, choose a parameter for new setting.
Step 4. Press and hold [Option], then click desired min/max button in window. Setting is now stored for those
channels.
Encoder Selection Menu
Special Buttons
Virtual Encoder Values
Current Encoder Type