Dimmer check commands, Clear status errors, Dimmer check commands clear status errors – PRG Vx76 User Manual 3.6 User Manual
Page 365
Advertising
VX76 SOFTWARE USER MANUAL
349
Dimmer Check Commands
Dimmer Check commands are available on the command-line.
The command syntax is:
+
[Dimmer] universe/channel [At] value [Enter] - Set dimmer at universe/channel to value
+
[Dimmer] [+] - advance to next dimmer
+
[Dimmer ] [-] - return to previous dimmer
+
[Dimmer] [Dimmer] - exit dimmer check
When dimmer check is active, the [Dimmer] key on the keypad will blink.
Clear Status Errors
All error messages can be cleared using the Clear Status Errors command.
To clear all error messages:
+
At Special menu, select Clear Status Errors.
Advertising