PRG Vx76 User Manual 3.6 - Manual (Page 163)

VX76 SOFTWARE USER MANUAL 147
Playback Using the Grab Feature
Note: The Grab feature was added with Vx76 software version 2.0. The previously unused [Fan Type] button on the
command keypad was replaced with a [Grab] button.
Grab provides the capability to withhold functions of a channel from playback. When a channel is "grabbed," the
current function filter will determine which parameters are affected. These parameters will respond normally to all
manual commands, but will not respond to any submaster control.
Grab is initiated from the command line. When the [Grab] button is pressed, the function filter will automatically open
(as with Selective Store), to highlight the fact that the filter applies to Grab and to allow setting of the desired state.
The Grab selection can be set in various ways, including command line and control key combinations. All normal
selection rules apply in terms of additive and exclusive selects. For example, [Grab] [1] [Thru] [5] [Enter] will result in
channels 1-5 being the only grabbed channels (just like selection would work). [Grab] [+] [1] [Thru] [5] [Enter] would
add channels 1-5 to the grab selection.
Using with the command line:
+ [Grab] [Enter] - Sets the grab selection to current selection (all others ungrabbed). If no channels selected, it
would ungrab all.
+ [Grab] (channel select expression) [Enter] - Sets grab selection to expression (all others ungrabbed)
+ [Grab] [0] [Enter] - Sets grab selection to none (ungrabs all).
+ [Grab] [+] (channel select expression) - Grabs additional channels (others are unaffected).
+ [Grab] [-] (channel select expression) - Ungrabs specified channels (others are unaffected).
When channels are grabbed, the channels specified by the grab command will become the current selection . For
example, if channels 1-10 are selected and [Grab] [20] [Enter] is input on the command line, then Channel 20 will be
selected and channels 1-10 deselected.
Using with other keys:
+ [Grab]+[submaster choose] - Grabs channels controlled by the submaster (all others ungrabbed). ("Choose" is
activated by touching the specific submaster on the touchscreen.)
+ [Grab]+[group select] - Grabs channels in group (all others ungrabbed).
When Grab is used as a control key, it will be automatically dismissed on the command line as with other control keys
like [Store]. For example, [Grab]+[group select].
Showing the grab selection:
+ [Group] [Grab] [Enter] - Sets selection to current grab selection.
Shift
Option
Cmd
1 2 3
. 0 Clear At Enter Full
7 8 9
Time 4 5 6 Sub
Rate
Link + Thru - Loop
Force
Mark
Cue/
Delay/
Speed
Track
Back
Track/
Wait/
Trail
Sneak Label
Move
Delete
Copy/
Sel Park/
Patch Undo Recall
Store Unpark
Update Grab
Help
Query/
Store
Block/
UnBlk
Revert
Manual/
Effect Set Seq
Dynam Group Step
Snap
Beam Color Preset
Macro
Shot
Chan
Cue/
Stack
Board
Cue