PRG Vx76 User Manual 3.6 - Manual (Page 73)

VX76 SOFTWARE USER MANUAL 57
[Next] and [Last]
The [Next] and [Last] buttons will step through all channels.
Figure 3-2: Next and Last Buttons
+ [Next] - increments the channel selection by one.
+ If a single channel were selected (either with the keypad or the 100 button array), pressing [Next] will increment
the channel selection by one. If a range of channels is selected, the first press of [Next] will select the first channel
in that range. Subsequent presses will increment the channel selection by one, but will not select a channel
outside the range.
+ [Last] - decrements channel selection by one.
+ If a single channel were selected (either with the keypad or the 100 button array), pressing [Last] will decrement
the channel selection by one. If a range of channels is selected, the first press of [Last] will select the last channel
in that range. Subsequent presses will decrement the channel selection by one, but will not select a channel
outside the range.
Press and hold [Next] while pressing [Last] to reselect the original channel range.
Note: When working with Ordered Groups, Next/Last will follow original selection order. Refer to "Ordered Groups"
on page 131.
Tilt Pan
Intensity
Full Mark
Out Zero
Last Next
High
Light Flip
Open
Close [Next] and [Last] Buttons
Note: The V676 console is
shown in this example, however,
these buttons are found on all
Vx76 console front panels.
Tip