PRG Vx76 User Manual 3.6 - Manual (Page 139)

VX76 SOFTWARE USER MANUAL 123
Note: This action will delete color information for all types stored.
Recall a Color:
Step 1. Select required channels (only selected channels that have data stored in that Color will be affected).
Step 2. Press [Color] [n] [Enter] (where n is the discrete Color number).
Color Palette Data Window
Color data can be viewed in the Color Palette Data window.
The top portion of the window shows current stored Colors, along with all applicable luminaires.
By selecting a single color and clicking on the Data drop-down window button, all of its numeric
values can be viewed.
Open Color Palette Data window:
+ At Data menu, select Color Palette Data.
It is possible to copy data from luminaire type to luminaire type using the Color Palette Data window. During the copy
process, data will be appropriately mapped to the new luminaire type. Copy and Paste of palette data allows either
Paste Merge or Paste All actions.
+ Merge copies data only where existing data does not exist in the destination and will not over-write existing data.
+ Replace All clears out all of the existing destination data and replaces it with the source data.
Data Drop-Down Window -
Displays data for selected
Color.
Color Number
Value -
Displays value that
for the parameters when
Dynamic -
Displays dynamic state information when selected
luminaire is reporting
selected.
Luminaire Name Box -
Select to initiate the copy
function (see below)