PRG Vx76 User Manual 3.6 - Manual (Page 19)

VX76 SOFTWARE USER MANUAL 3
Obtaining Additional DMX Profiles
DMX fixtures are controlled by the console using a profile . The profile includes the number of DMX channels required
to operate the fixture and parameter mapping for console control. A wide range of profiles are included with the
console software, however, in the event you require additional profiles please send an email to
[email protected] .
Please be prepared to provide the necessary information to generate the profile as required. (Profiles are covered in
"Updating Profiles" on page 344.)
Text Conventions and Icons
The following button styles are used throughout this manual:
Note these equivalent buttons on the Mac keyboard and front panel command-line keypad:
[Button]
Front panel "hard" button.
Example: Press [Cue] [1] [Enter] to recall Cue 1.
<Button>
Optional desk button press.
Example: Press [Store] <Cue> [n] [Enter].
[Button 1 ] / [Button 2]
Front Panel button combination sequence.
Press and hold Button 1 while pressing Button 2.
[Button/Button] Front Panel button double-click.

Button
 Touchscreen "soft" button.
Example: Press

Plan View

to open plan view.
Button
Software menu or window dialog button.
Example: Click
OK .
Example: At Operation menu, select Luminaire Status .
ENTER
Mac keyboard key.
Example: Hold down
ALT on the Mac keyboard.
Shift
Option
Cmd
1 2 3
. 0 Clear At Enter Full
7 8 9
Time 4 5 6 Sub
Rate
Link + Thru - Loop
Force
Mark
Cue/
Delay/
Speed
Track
Back
Track/
Wait/
Trail
Sneak Label
Move
Delete
Copy/
Sel Park/
Patch Undo Recall
Store Unpark
Update Grab
Help
Query/
Store
Block/
UnBlk
Revert
Manual/
Effect Set Seq
Dynam Group Step
Snap
Beam Color Preset
Macro
Shot
Chan
Cue/
Stack
Board
Cue WIN =
ALT =
SHIFT =
Mac
Keys