PRG Vx76 User Manual 3.6 - Manual (Page 188)

172 VX76 SOFTWARE USER MANUAL
A complete effect could be created using only the main Effect Edit screen, providing that it does not have more than
seven parts to the set or more than seven steps in the sequence. If either the parts or steps exceed seven, then the
Set Edit and Sequence Edit screen can also be used to create effects with numerous parts/steps. The appropriate
use of each screen will be covered in the following sections.
Like other palette items (Color, Beam, Group, etc.) effects are given a discrete number. Once stored, they can be
accessed in the command line or in the Effects palette. Refer to
"Front Panel Palette Displays (V476/V676 Only)" on
page 106 for more information.
What is a Set?
A set consists of one or more parts. Parts are made up of specified channels (luminaire groups) with the limitation
that a channel may only appear once within the set.
The following diagram shows an example set consisting of four parts:
Set 0 (Default Set)
One pre-programmed set is available, which contains all patched channels as a single part. This is the default set
assumed by all effects unless changed. It can be used to quickly create an effect which would include all the
luminaires in your system.
Set
Part 1 Part 2 Part 3 Part 4
Set 0
Part 1
All Patched Channels