Selective recall, Undo a delete command, Selective recall undo a delete command – PRG Vx76 User Manual 3.6 User Manual
Page 277: Selective, Recall
VX76 SOFTWARE USER MANUAL
261
Selective Recall
The Selective Recall feature is used to recall specific parameter data from specified channels (
active
or
inactive
) in a
cue, preset, or beam state.
Guidelines:
+
Selective Recall routes through the filter settings.
+
If Timing is selected at the touchscreen filter, then the parameter
and
all timing information will be recalled (making
that the current state).
+
If Timing is
not
selected at the touchscreen filter, then only the parameter will be recalled.
+
If Manual Timing is enabled (refer to
on page 198), then the current time information in the
luminaires will be recalled. (For example, if focus has a time of 10 seconds and color has a time of 5 seconds,
then the luminaire will recall the parameters using those individual times.)
Note: The system assumes that data to be recalled is from a cue. As such, use of the <Cue> button is optional.
Recall stored cue data:
Step
1. Using Function Filter, select parameters to be recalled. (Refer to
Step
2. If timing is desired, press [Man Time]. Recalled parameters will change in the luminaire’s current time
settings.
Step
3. Select channel(s) as required.
Step
4. Press [Recall] <Cue> [m] [Enter]. All stored data will be recalled from the specified cue (m) for the selected
luminaires, as dictated by the selections on the filters.
Recall stored preset data:
Step
1. Using Function Filter, select parameters to be recalled. (Refer to
Step
2. If timing is desired, press [Man Time]. Recalled parameters will change in the luminaire’s current time
settings.
Step
3. Select channel(s) as required.
Step
4. Press [Recall] [Preset] [x] [Enter]
or
[Recall]
Preset Palette Button
. All stored data will be recalled from the
specified preset (x), as defined by the selections on the filters.
Undo a Delete Command
In addition to reversing Store and Update commands, the Undo feature can be used to reverse a Delete command.
Undo (reverse) a Delete command:
+
[Undo] [Store] [Enter] - reverses the last store/update/delete command.
(cue)
Undo Store