PRG Vx76 User Manual 3.6 - Manual (Page 98)

82 VX76 SOFTWARE USER MANUAL
Parameter Columns Window
The Parameter Columns window is used to define which types of information will be displayed in the data window
(columns). Using the cursor, select or deselect the boxes as required.
For Focus and Color, two display options are
available. Focus can be displayed as a single
column and/or two columns, pan and tilt. Color
can likewise be displayed as a single column
and/or up to four individual color columns,
which would provide data for each filter/wheel/
plate mechanism in the luminaire. When the
single Focus/Color box is checked, the column
will display the Preset/Color source, as long as
the data is being taken from a single Preset/
Color. If not from a single Preset/Color, then
the column would display "---." If Pan/Tilt, etc.
are checked then those columns also display
the source, or if set by encoders, the numerical
values. To see both source and # values, select
[P] and [V] (at Luminaire Status window).
Right-click with mouse or trackpad
to bring up shortcut options. Parameters with a checked
box will be displayed in window