PRG Vx76 User Manual 3.6 - Manual (Page 44)

28 VX76 SOFTWARE USER MANUAL
Patch Procedures
Luminaire patching can be done using the command-line keypad and central touchscreen. (It can also be done using
the Plan View, however, this is covered in
"Plan View Layouts" on page 41.)
Enabling/Disabling Patch Editing
To enable patch editing:
+ Press the

Patch

button on the touchscreen. (It will be highlighted in yellow and display "Patch Editing" when the
editing mode is active.)
To exit patch editing (disable):
+ To exit patch editing, press the

Patch Editing

button. A confirmation dialog will allow you to save or discard
changes, or return to editing (cancel).