Marking a named point, Figure 3-96 – TeeJet Swath XL SmartPad II User Manual
Page 123
SmartPad II
Software Version 4.03
Chapter 3 - Real-Time Guidance
3-69
Mapping Points and Hazards
Marking a Named Point
The map object Named Point allows you to mark a named point at the vehicle location. A Named Point is the same as
the Point object except that the name of the point is entered when starting guidance. When SmartPad II is setup to
map a Named Point, a point button will be added to the view page button bar, see Figure 3-97. To map a Named Point
drive to the location of the object or feature you want to map, this location should coincide with the location of your
GPS antenna. Next, highlight the Point button in the button bar using the
keys and press
. Notice that
when you highlight the Point button, the name of the point appears in the information box at the bottom of the view
page.
Figure 3-96: Marked Point in the View Page
Figure 3-97: Mapping a Named Point