TeeJet Swath XL SmartPad II - Manual (Page 145)

SmartPad II
Software Version 4.03
Chapter 4 - Waypoint Navigation 4-9
Lightbar Setup
Alarm Range
Defines the distance from a sample point you want to be notified of the pending sample point. You will use this as a
notification of when you are on the point or at least close enough to the point to consider it visited.
To change the Alarm Range setting; highlight the Alarm Range menu item and press . The Alarm Range dialog
box will appear. Enter the desired distance using the arrow keys , once the desired distance is entered, press
to return back to the Lightbar setup menu, see Figure 4 -8.
Figure 4-8: Setup Lightbar Alarm Range