Adding the start navigation button, Figure 4 -36 and, Figure 4 -37 – TeeJet Swath XL SmartPad II User Manual
Page 168: Figure 4 -36, T, figure 4 -37, Notice in figure 4 -37 that once the operator
Advertising
4-32
Chapter 4 - Waypoint Navigation
Nav 2 Point Real-Time Scenarios
SmartPad II
Software Version 4.03
Adding the Start Navigation Button
This example also defines a special case. When the operator initially starts the Nav 2 Point application there are no
existing points; therefore the Start Navigation button is not placed in the button bar, Figure 4 -36. Once the operator
added the first sample point, the Start Navigation button is placed in the button bar (Figure 4 -37#, and will remain in
the button bar unless the operator deleted all sample points in the Point/Grid file.
Figure 4-36: Marking the Sample Point and Entering A Sample Name
Figure 4-37: Adding Sample Point Completed.
Figure 4-38: Icons Used in this Example
Advertising