TeeJet Swath XL SmartPad II - Manual (Page 45)

Fieldware for Smartpad II
Software Version 4.03
Chapter 2 - Software Overview 2-23
Communications Setup
DGPS Type
The DGPS Type defines the type and accuracy of the DGPS source used with your GPS Receiver. This setting defines
which set of vehicle dynamic parameters should be used in guidance and point navigation.
To change the Display Backlight setting; highlight the Backlight menu item and press . The Display Backlight
dialog box will appear. Select the desired setting using the arrow keys , once the desired setting is selected,
press to return back to the GPS Receiver setup menu, see
Figure 2-24: Setting the DGPS Type Parameter
Setting Description
Standard Sets vehicle dynamics for Standard DGPS sub-meter accuracy. DGPS sources such as
WAAS, Beacon and Satellite should use the Standard setting.
RTK Sets vehicle dynamics for Real Time Kinematics (RTK) decimeter to centimeter accu-
racy.
Table 2-10: The Display Backlight Menu Item Settings