TeeJet Swath XL SmartPad II - Manual (Page 79)

SmartPad II
Software Version 4.03
Chapter 3 - Real-Time Guidance 3-25
Lightbar Setup
Lightbar Setup
The Lightbar Setup menu is accessed from the Main Menu Launcher Setup item. There are nine lightbar menu items
associated with the Lightbar Setup process; Drive Sensitivity, Display Mode, Parallel Message 1, Parallel Message 2,
Parallel Message 3, Curved Message, LED Brightness, Alarm and Hazard Range, see Figure 3-34.
To access the Lightbar menu page, highlight the Setup menu item in the Main menu page and press , this takes
you to the Setup Menu, see Figure 3-33. Within the Setup Menu highlight the Lightbar menu item using then
press . You can change any of the Lightbar menu items by highlighting the desired menu item and pressing .
Figure 3-33: Accessing the Lightbar Menu Page