TeeJet Swath XL SmartPad II - Manual (Page 19)

SmartPad II
Software Version 4.03
Chapter 1 - Introduction 1-11
CompactFlash Card Instructions
Storing Data on the CompactFlash Card
If you purchase the optional CompactFlash card with the SmartPad II product, you will be able to store As
Applied, boundary and point data to the card. The CompactFlash card must be inserted into the SmartPad II
card slot during the real-time guidance process. No data is stored internal to the SmartPad II.
In order for the SmartPad II software to recognize the CompactFlash card, the card must be inserted into the
SmartPad II prior to turning the unit on.
All data written to the CompactFlash card is stored at the root directory of the card. If you choose to view
existing data such as a previously mapped field boundary, the boundary file or any other compatible file type
(.RCD, GMF and.BND) must reside in the root directory of the CompactFlash card. If you create a folder or
directory on the CompactFlash card and store data it that folder, the SmartPad II software will not be able to
access that data.