TeeJet Swath XL SmartPad II - Manual (Page 195)

Fieldware for Smartpad II
Software Version 4.03
Chapter 5 - Field Mapping 5-17
Mapping Points and Hazards
Mapping Points and Hazards
Mapping points and hazards during the real-time mapper process is another feature of the SmartPad II product. There
are two types of mapping objects that you can select from, Point, and Hazard. Each of these object types are described
in more detail below.
Marking a Point
The map object Point allows you to mark a point at the vehicle location. A point button will be on to the view page
button bar, see Figure 5-19(left side). To map a point drive to the location of the object or feature you want to map,
this location should coincide with the location of your GPS antenna. Next, highlight the Point button in the button bar
using the keys then press. The point dialog box will appear, see Figure 5-19 (right side), enter the name of the point
using the keys. Press the to accept the point name and return to the real-time view page, see Figure 5-20.
Figure 5-19: Mapping and Naming a Point