The polyline stream mode – TeeJet Swath XL SmartPad II User Manual
Page 201
Advertising
Fieldware for Smartpad II
Software Version 4.03
Chapter 5 - Field Mapping
5-23
The Polyline Stream Mode
The Polyline Stream Mode
This mode is used to map or locate features that can be represented by a line. A continuous line will be mapped at the
designated antenna location.
To map a polyline stream select the polyline stream button once selected a name must be established Figure 5-29.
After a name is entered begin driving the path to be located. Notice when the polygon stream button is selected the
button changes to a finish flag see Figure 5-30. To stop mapping a line select the finish flag and all Mapper modes
will appear in the button bar.
Figure 5-29: Polyline Stream Setup
Figure 5-30: Ending Polyline Stream
Advertising