TeeJet Swath XL SmartPad II User Manual
Page 77
SmartPad II
Software Version 4.03
Chapter 3 - Real-Time Guidance
3-23
Data Setup
Example 4: Setting up the Point and Hazard Mapping Objects
This example describes how to setup SmartPad II to map point objects while running guidance. Refer to “Map
Object” on page 3-18 for a detailed description of what type of objects can be selected and how to select an object in
the Data menu. In this example a Named Point was selected in the Data menu, as shown in Figure 3-29. Once the type
of mapping object has been selected in the data menu, move to the Main menu page using
. From the main menu
page highlight the Start Guidance menu item and press
.
Because a Named point object was selected, there are two additional menu items, Map File and Object Name, located
in the Start Guidance menu page, see Figure 3-30.
Figure 3-29: Selecting a Named Point in Data Setup.
Figure 3-30: Start Guidance Menu with a Mapping Object Menu Items