TeeJet Swath XL SmartPad II - Manual (Page 35)

Fieldware for Smartpad II
Software Version 4.03
Chapter 2 - Software Overview 2-13
Communications Setup
Port Data Bits
The Data Bits menu item sets the GPS port Data Bits on the SmartPad II, see Table 2-3.
To change the Data Bits setting; highlight the Data Bits menu item and press . The Port Data Bits dialog box will
appear. Select the desired setting using the arrow keys , once the desired setting is selected, press to return
back to the Communications setup menu, see Figure 2-14.
Figure 2-14: The Port Data Bit Menu Item
Setting Description
7 Sets the GPS serial port data bit value to 7.
8 Sets the GPS serial port data bit value to 8. This is the default setting.
Table 2-3: The Port Data Bit Menu Item Settings