TeeJet Swath XL SmartPad II - Manual (Page 66)

3-12 Chapter 3 - Real-Time Guidance
Guidance Setup
SmartPad II
Software Version 4.03
GPS Type
GPS Type allows you to select between DGPS mode and GPS mode. Changing this setting on your
SmartPad II does not make any changes to your GPS receiver. If you want to operate without
Differential corrections you may have to turn off corrections in your GPS receiver.
To change the GPS Type setting; highlight the GPS Type menu item and press . The GPS Type dialog box will
appear. Select GPS or DGPS. Then press to return back to the Guidance setup menu.
Figure 3-14: The GPS Type Menu Item
Setting Description
DGPS Selecting DGPS mode allows you to run with differential
corrections only. This is the default and recommended
mode.
GPS GPS mode allows you to operate guidance without differen-
tial corrections. This feature is primarily for users who are
in areas that do not have deferential correction coverage; or
who have intermittent deferential coverage. GPS mode will
also operate if differential corrections are available.
Table 3-3: GPS Type Settings