TeeJet Swath XL SmartPad II - Manual (Page 177)

SmartPad II
Software Version 4.03
Chapter 4 - Waypoint Navigation 4-41
Lightbar Index
Distance to Point: The distance to the point the user is navi-
gating to.
Mapping Boundary: This message is displayed when the
user is mapping the field boundary. The arrow symbol on
the left indicates the field boundary is on the left side of the
vehicle.
Mapping Boundary: This message is displayed when the
user is mapping the field boundary. The arrow symbol on
the right indicates the field boundary is on the right side of
the vehicle.
System Warning: The message is displayed when there is
loss of GPS differential corrections. Guidance calculations
are stopped until differential corrections resume.
System Warning: This message is displayed when there is a
complete loss of GPS signal to the GPS receiver or Smart-
pad. Navigation calculations are stopped until DGPS signal
resumes.
Lightbar Version Message: This message is displayed when
the user runs the Lightbar Test. M 4 indicates the lightbar
model number and the 2.0 indicates the lightbar protocol
version number. This number will vary and is based on
lightbar version and model.
Lightbar State Description
Table 4-11: SmartPad II Lightbar Index for Nav 2 Point