Hazard range – TeeJet Swath XL SmartPad II User Manual
Page 92
3-38
Chapter 3 - Real-Time Guidance
Lightbar Setup
SmartPad II
Software Version 4.03
Hazard Range
The Hazard Range menu item is the distance prior to an impending Hazard the operator wants to be notified. This dis-
tance value is set for Hazard detection only. A distance of 100 ft. (30 m) is the minimum setting for this menu item.
This menu item should be used in conjunction with the Alarm menu item found on page 3-36.
To change the Hazard Range setting; highlight the Hazard Range menu item and press
. The Hazard Range dialog
box will appear. Enter the desired distance in feet (meters) using the arrow keys,
, once the desired dis-
tance is entered, press
to return back to the Lightbar setup menu, see Figure 3-49.
Figure 3-49: The Hazard Range Menu Item