TeeJet Swath XL SmartPad II - Manual (Page 184)

5-6 Chapter 5 - Field Mapping
Data Setup
Fieldware for Smartpad II
Software Version 4.03
Boundary
This menu item allows you to indicate if you want to create or show an existing field boundary or turn this menu item
off. If Show is selected, you must select the name of an existing field boundary from a pick list. If Create is selected
the Swath software will use the antenna offset information, described below, to trace out the field boundary. All file
naming will occur after you have pressed the Start Mapper menu item.
To change the Boundary File setting; highlight the Boundary menu item and press . The Field Boundary dialog
box will appear. Select the desired setting using the arrow keys , once the desired setting is selected, press
to return back to the Data setup menu, see Figure 5-6.
Figure 5-6: The Boundary Menu Field - Show Item Selected
Setting Description
Show Shows an existing boundary file (.BND) in the background of the real-time
map view.
New Creates a new .BND file.
Off No .BND file will be used in the real-time portion of Mapper.
Table 5-2: Boundary File Settings